Sagging Sofa? Refresh Rather Than Replace.
There’s a time in every day when you want to kick off your shoes and sink into the welcome embrace of your favorite seat in the house. Over time, however, the well-loved and much used couch can show its age. If your once plump and lush sofa is looking more squished and sagging, follow these six steps to bring new life into your favorite seat.
1. Snap a photo of your sofa.
While it’s always fun to admire your work with a good before/after visual, that’s not our goal here. Having a picture will help you reassemble the couch properly when you’re done. And if you’re going to spice things up with a few new throw pillows, having that snapshot for your designer or with you in the stores will come in handy, too!
2. Remove the seat cushions from the sofa.
The cushions likely have a zipper on the side that faces into the couch. Remove the covers. This is a good time to wash those! Just make sure you follow the directions on the tag. Go the eco-friendly route and air dry the covers outside. While you’ve got everything taken apart, vacuum the foam cushions and the base of your sofa.
3. Inspect the frame of your sofa.
Is it in good shape? Are the springs looking worse for the wear? You may find the bones of your favorite coach are beyond your abilities to repair. If that’s the case, it might be time to find a new love. However, if the frame just needs a little TLC, one option is to place a sheet of plywood over the base of your seat. This will create a new platform for the cushions to sit on. Cut the platform to fit the base properly. Once you put your cushions back into place, you’ll never know the wood is there.
4. Plump your back cushions up.
Use Poly-fil batting and/or quilt batting to plump up the back cushions of your sofa. If the back cushions don’t come off the frame of your couch, they may still have a zipper at their base. That’s when you reach for the Poly-fil. Tuck generous handfuls of fill behind the existing pillow or foam. If you need help, use a ruler to get the stuffing into the corners and edges. Fill each cushion until you achieve your desired level of plump and comfy.
If you can remove the cushions, wrap the foam with layers of quilt batting. Use spray adhesive to help hold each layer of batting in place. How many layers? That depends on how plush you want your seat and how much space you have between the existing cushion and the seat cover. You want your revitalized cushion to have a tight fit, but it still needs to get in the cover.
5. Reassemble your sofa.
Place the now clean and plumped cushions back into place. If you have any extra Poly-fil, freshen up your throw pillows before you place them back into place. Or take your sofa photo shopping, and pick up new throw pillows or fabric to make your own covers for the existing pillows.